Image 1 of 7
Image 2 of 7
Image 3 of 7
Image 4 of 7
Image 5 of 7
Image 6 of 7
Image 7 of 7
11-19 GM 2500 Front Frame Overlays
from $224.99
Installation Instructions
Line overlays up onto your frame and mark hole closest to the front of the truck on both sides
Remove the 4 10mm bolts holding the sway bar to the chassis
Drill marked hole with a 7/32 drill bit
Install bolt into first hole, tighten and mark next hole
Repeat until all holes are drilled
Note If you drill all holes at the same time they may not line up on final install
Note Some pieces may use factory hardware to install